Archive for the ‘Cisco’ Category

Dynamic IPv6 routing with Cisco IOS and Quagga on OpenWRT

Sunday, October 19th, 2008

Here’s how to make dynamic IPv6 routing work between a Cisco IOS router and an OpenWRT Linux Quagga router. I couldn’t find a similar howto anywhere, so I decided to write my own.

I am using OpenWRT Kamikaze 7.09 (kernel 2.4) on an ASUS WL-500gP wireless router. Any IPv6 enabled Cisco router should do.

I assume you have already installed the IPV6 kernel modules and userland tools, and set up static addresses for your interfaces (if you haven’t check out the OpenWRT IPv6 Howto).

I am using SixXS for tunneling an IPv6 /48 prefix over IPv4. (more…)

Posted in IPv6, OpenWRT, Networking, Cisco, Linux | No Comments »

WPA-PSK authentication with Cisco IOS

Friday, October 26th, 2007

When my Linux firewall box died a couple of months ago, I finally decided to by a Cisco router for my Internet connection. Before the Linux box I had an OpenBSD firewall, and I decided it was time to learn yet another platform.

(more…)

Posted in Networking, Cisco | No Comments »